How To Disinfect A Chainsaw? Chainsaw Cleaning 101

Therefore, cleaning and disinfecting the chainsaw is something you should do regularly. However, How to Disinfect a Chainsaw?

In the article below, we will guide you on how to disinfect the saw in the most detail. Just follow our steps and your tools will be as clean as new in no time.

Necessary tools

Necessary tools to get for cleaning a chainsaw (Link)

Before starting to clean and disinfect the best battery chainsaws, you need to prepare all the necessary tools.

We have researched and synthesized some of the materials and necessary chemicals so you can start cleaning your saw.

Disinfectant chemicals

The chemicals that you can use to clean dirt, bacteria, and fungi from your chainsaw aren't too hard to find. You can find them in your home or buy these chemicals at the pharmacy.

Isopropyl alcohol and alcohol

Alcohols like Ethanol and isopropyl alcohol are both good at cleaning and killing pathogens. These chemicals are all very common in households.

In particular, alcohols have a quick evaporation nature, they will not cause metal parts on your saw to rust.

Homemade disinfectant solution

You can also make your own disinfectant solutions.

When you dissolve baking soda in warm water, you have a cleaning solution that works well. Using vinegar and hydrogen peroxide is also a method of killing bacteria that you can use.

Bleach

Also, if your chainsaw has stubborn dirt, you can use professional cleaners. The composition of these chemicals is also highly antiseptic, so you can use them with confidence.

However, you need to use bleach according to the manufacturer's instructions to ensure safety and effectiveness.

Cleaning tools

In order for the cleaning chemicals to work their best, you'll need tools to help clean the dirt on the chainsaw. In addition, items to ensure your safety during cleaning are also indispensable.

Brushes and wipes

Brushes and wipes (Link)

The dirt on the chainsaw will wash away quickly when you clean your tool with a brush and cleaning cloth.

With stubborn stains, the iron brushes will help you clean quickly and without too much effort. In addition, complex machine parts will need you to use a soft bristle brush to clean.

Gloves and masks

Next, you should wear gloves and a mask before disinfecting the chainsaw. Gloves will protect you from accidental injuries that a chainsaw blade can cause. A mask will help you not be affected by chemical odors during work.

How To Disinfect a Chainsaw?

After you have all the tools ready, let's start sterilizing the electric chainsaw. The following steps will help you do the job with the best efficiency.

Disassemble parts

First, you will have to disassemble all the main parts of the saw to be able to deep clean these details. Locate the nuts and slowly unscrew them so that the parts of the device come apart.

Cleaning the chainsaw bar

Next, clean your chainsaw bar. The position of the saw bar often collects a lot of dirt and wood chips during work. 

You can use a damp cloth and cleaning solutions to clean this part.

If the chainsaw bar is rusty, your job will be a little harder. You need to soak it in vinegar or baking soda solution to dissolve the rust. Then use a brush to completely remove these stains from your device.

Cleaning the saw chain

Experts recommend soaking the saw chain in a disinfectant solution and scrubbing it with a soft-bristled brush.

The soft, fine bristles of the brush will penetrate deep into the saw chain, removing all dirt and germs if any.

However, make sure you wear gloves and a mask for safety. Disinfectant chemicals can corrode the skin of your hands, or give you headaches, even poisoning if inhaled.

Cleaning the machine head

Next, you can use a cloth soaked in the cleaning solution and a soft paintbrush to clean the saw head. Carefully brush off dust and dirt in this area. This will help your saw to shine like new.

Clean the air filter, spark plugs, and heatsink

For gas-powered equipment, the air filter, spark plugs, and heat sink are the machine parts that you need to focus on cleaning.

Gas-powered saws have more complex parts and crevices than other devices. Dirt and pathogens can accumulate in these locations.

So you need to spend more effort to clean every detail with detergent and brush. This work will avoid the phenomenon of air flow created when using the saw to spread bacteria that are harmful to your health.

Dry the parts

Before assembling the clean machine parts back together, you need to make sure they are completely dry.

If you connect parts that are still wet, enclosed areas with a lot of steam will become an ideal environment for mold and bacteria to grow. These pathogens not only harm the device but also threaten the user's health.

Assembled into a complete chainsaw

Finally, assemble the parts of the device into a complete saw. You now have a clean and safe tool to keep using.

Conclusion

Disinfecting a chainsaw is a task that you cannot fail to perform to ensure the working efficiency and safety of the tool.

The tools needed to disinfect a chainsaw are easy to find. In addition, the sterilization steps for the tool are not too difficult.

I hope that after this article, you already know how to disinfect a chainsaw? and can do this job easily. Good luck with your chainsaw!